The Qbitus Q-Care Integra 1 is a contoured, multi-layered cushion range giving excellent posture and lateral control by way of fixed adduction, abduction and extended hip guides. Offered in a choice of foams for different levels of protection (Q-Care Integra 1 – low/ medium, Q-Care Integra 2 – medium/high) to suit your clients needs.
| Description | Qbitus QCARE INTEGRA 1 |
| Sizes | Up to 18” x 18”. All cushions are 3” in thickness. Larger sizes available POA. |
| Cover | Supplied as standard with a vapour permeable cover with integrated non slip base, with towelling material as an option. Inner vapour permeable liner included as standard. All relevant cleaning, safety, technical and installation information printed on rear of cover |
| Foam Insert | Laminated in construction, the base layer is CM65, a load bearing foam. The seat well is RX39. A dense side support foam is used for increased lateral control, and both models are finished with a layer of RX39 for added comfort. |
| Risk Category | Very High |
| Weight Guide | For maximum comfort, durability and performance the weight guide on a 17”x17” is 16 Stone (102kg). The addition of a 1” crescent base increases the load bearing by 30%. |
| Support Pressure | 1 1/3 lbs per square inch at 50% compression or deflection |
| Linear Load Limit | 29 stone (184kg) on a typical 17”x17” cushion |
