BEST EasyStand Zing MPS in Ireland

EasyStand Zing MPS

The Zing MPS is the only multi-position stander that pivots two directions, allowing the unit to go from flat-to-load supine to 20 degrees prone in one motion. There is no need to transfer the user in and out, flip pads, foot plates and trays. This ability provides a therapeutic opportunity not possible with other standing frames. It is also one of the few standers that provides the option of up to 30 degrees of independent leg abduction. Because the abduction pivot point is in alignment with the natural hip pivot of the user, the entire leg abducts eliminating the need to adjust foot plates or knee pads. Not only does this provide anatomically correct abduction, but rotating hip guides and only having to loosen a single knob per leg enables simple and intuitive standing in abduction.

Size 1 – infancy to 44″, 70 lb weight capacity
Size 2 – 40-60″, 154 lb weight capacity

Categories: Paediatric Standers, Standing Frames

Description

The Zing MPS from EasyStand at MMS Medical is the only multi-position stander that pivots two directions, allowing the unit to go from flat-to-load supine to 20 degrees prone in one motion. There is no need to transfer the user in and out, flip pads, foot plates and trays. This ability provides a therapeutic opportunity not possible with other standing frames. It is also one of the few standers that provides the option of up to 30 degrees of independent leg abduction. The Zing MPS is also available in Size 2.

Fits individuals up to 44″ and up to 70 lbs.

request call back

Request Demo

Features

The Zing MPS Size 1 is the smaller version of the Zing MPS Size 2. The Zing MPS provides a new therapeutic opportunity to stand in supine, upright and prone without having to transfer the child in and out of the stander to switch between supine or prone standing. No need to flip pads, foot plates and trays to change positions. Tool-free adjustments and/or removal of support and positioning components adds to the ease of use.

30 degrees of independent leg abduction (60 degrees bilaterally)
A simple knob allows the entire leg to abduct up to 30 degrees, no need to re-adjust the foot plates or knee pads.

Unique Lift Mechanisms
The base unit is equipped with a prone position lockout to prevent inadvertently going past vertical. A gas spring lift lockout is available to prevent any inadvertent position changes which can be useful if other children are present during standing sessions. The Dual Control enables position changes by foot pedal or hand control.

Swing-away Tray
Multi-adjustable tray can swing either direction while remaining attached to the unit or it can be removed completely. This tray, when swung away but attached on one side of the stander, is close and well within reach once a transfer has been completed. The transfer height of the Zing MPS Size 1 is a comfortable 31″ from the floor surface.

Remarkably Modular
With 75 support and positioning components/accessories, it can be configured as a simple stander or fit a child with more complex needs. The support and positioning components available (independent and multi-adjustable foot plates, knee pads, calf pads and floating hip guides) make the Zing MPS one of the few multi-position standers that can accommodate contractures on one or both sides.

Specification

Basic Unit	Imperial	Metric
Height Range	up to 44”	up to 112 cm
Weight Limit	70 lbs.	32 kg
Transfer Height( Horizontal Position )	32”	81 cm
Center of Pelvic Support to Footplate Range, may invert footplates as necessary	7″ – 22”	18 cm- 56 cm
Upper Body Support Height Range	4”	10 cm
Kneepad Depth Range	5”	13 cm
Kneepad Inside Width	2.5”, 3.25”, 4.25″, 5″	6cm, 8cm, 11cm, 13cm

Multi-Adjustable Knee pads Height Range	+/- 0.75”	2 cm
Weight of basic unit	55 lbs.	25 kg
Frame footprint, Caster-to-caster	20” x 28”	51 x 71cm
Maximum Dimensions	21.5 x 29.5	55 x 75cm
Upholstery	Black nylon/Neoprene or Molded Urethane
Hygienic Covers	Polyurethane Laminate ECO-PUL
Frame color	Green, Purple, Orange, or White
Casters and Wheels	3’’ diameter	8cm diameter
Lifting mechanisms Available	Gas Spring
Lift Options	Dual Control (hand lever) Lockout Knob

Options and Accessories
Supine positioning/ Prone-Forward positioning. Supine, MPS, TT	Supine 0-90 degrees/ Prone 0-20 degrees
Positioning, Prone Model	90 (vertical) to 0 (horizontal)
Positioning, Vertical Model	90 (vertical) only. Fixed position.
Leg Abduction	30 degrees per side
Foot straps extra small – length over arch	8”	20 cm
	10”	25 cm
Secure Foot straps – length over arch	Available in same lengths as regular foot straps
Footplate Options LxW	6.00” L x 3.00” W	15 cm L x 8 cm W
	7.75” L x 3.25” W	20 cm L x 9 cm W
	9.75” L x 4” W	25 cm L x 11 cm W
Footplate, platform style	8”L x 12.00” W	20 cm L x 30 cm W
Multi-Adjustable footplates – Plantar/Dorsi	+/- 20 degrees	+/- 20 degrees
Multi-Adjustable footplates – Fore/Aft	+/- 0.75”	+/- 2 cm
Multi-Adjustable footplates rotation	30 degrees left/right	30 degrees left/right
Single Calf Pad/Leg Rest	4” x 13.5”	10 x 34 cm
Single Calf Pad Strap, Fits circumference	24”	61 cm
Calf (Behind knee) Pad Option,Extra Small Pad Size, Small Pad Size, Fore/Aft Adjustment from seat plane	3.5 x 3.5 inches, 4.5 x 4.5 inches, -1 to +4 inches	9 x 9 cm 11.5 x 11.5 cm -2.5 to +10 cm
Independent Planar Leg (Calf) Support Tilt Table (TT) Pads – 3 sizes	4” x 6”, 6” x 6”, 8” x 6”	10 x 15 cm 15 x 15 cm 20 x 15 cm
Independent Planar Leg (Calf) Support Tilt Table (TT) Pad Strap – Fits circumference:	Up to 15”	38 cm
Table Mount and Tray Options/Specs	Posterior Support Models (Supine, MPS, TT)
Shadow Tray size – Molded/Acrylic	11”x19”	28 cm x 48 cm
Shadow Tray height range	3”	8 cm
Shadow Tray Fore/Aft range (from posterior pad to chest pad)	0” – 10”	0–25 cm
Swing-Away Tray size – Molded/Acrylic	11”x19”	28 cm x 48 cm
Swing Away Tray Height Range	3”	8 cm
Swing-Away Tray Fore/Aft Range (from posterior pad to chest pad)	4”- 9”	10 to 23 cm
Swing-Away Tray Angle Adjust Range	+40 degree inclines to -90 degrees (parallel to user when standing or in supine mode)
Upholstery/Positioning Options/Specs
Hip support pad size	3.5”H x 3.5”W	9cm x 9cm
Hip supports width range	6” – 10”	15-25 cm

Lateral support pad size	3.5”H x 3.5”W	9cm x 9cm
Lateral supports width range	7” – 11”	10 to 20 18-28 cm
Lateral supports height range	3.5”	9 cm
Lateral supports Fore/Aft Range	1”	3 cm
Pelvic Support Planar (2 sizes) All Configurations	5×7” 5×9”	13cm x 18cm 13cm x 23cm
Pelvic Support, Form-to-Fit (2 sizes) Posterior support (Supine, MPS, TT)	5″x7”, 5″x9”	13cm x 18cm 13cm x 23cm
Pelvic Support Form-to-Fit (2 sizes) Anterior Support (Prone and Vertical)	5″x10”, 5″x12”	13cm x 25cm 13cm x 30cm
Upper Body Support Planar	5″x5” (Anterior only), 5”x7”, 5”x9”, 7″x7”, 7″x9”	13cm x 13cm 13cm x 18cm 13cm x 23cm 18 x 18 cm 18 x 23 cm
Upper Body Support Form-to-Fit	5”H x 10”W, 5”H x 12”W, 7”H x 10”W, 7”H x 12”W	13cm x 25cm 13cm x 30cm 18cm x 25cm 18cm x 30cm
Upper Body/Pelvic Tilt Table (TT) Pads – 3 sizes	14”L x 14”W 16”L x 14”W 18”L x 14”W	36 x 36 cm 41 x 36 cm 46 x 36 cm
Chest Pad	3”Hx8”W	8cm x 20cm
Chest Strap (pad size)	5″Hx8”W	13 x 20 cm
Chest Strap (approximate user circumference)	Up to approx. 24”	Up to approx. 61 cm
Chest vest – X-Style	9.5”Lx9”W	24 x 23 cm
Chest vest – X-Style	11”Lx9.5”W	28 x 24 cm
Posterior Head Supports (Supine, MPS, TT)
Head support height range. (From top of upper body pad)	8”	20 cm
Head support depth range – from backrest	-2.5” to +1.5”	-6 to +4 cm
Head Support Size Extra-Small	5” H x 8” W Cushion	13 cm H x 20 cm W
Head Support Size Small	6” H x 10” W Cushion	15 cm H x 25 cm W
Flat Headrest	5” H x 7” W	13cm x 18cm
Form-to-Fit Head Support – Height, Width, variable up to approximately:	5”, 10”	13 cm 25 cm
TT Planar Head Support	8” H x 8.5” W	20 cm H x 22 cm W

Anterior Head Supports (Prone, Vertical)
Face Aperture	2 – 3 x 9” Pads	8cm x 23cm
Positioning belt – hip circumference	Up to approx.. 24”	Up to approx.. 61 cm
Configurations Available:
Supine	Posterior Support Pads
MPS (Multi-positional Stander, w/Prone Forward)
TT (Tilt Table, larger upholstery surfaces)
Prone	Anterior Support Pads
Vertical (fixed position, no lift options available)